Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 118 / 999

2-4-(7)
Filtering Again Section 2-4
2-4-4 Background Suppression
Background suppression (BGS) excludes the background of the measurement
object from the measurement process for easier measurement.
Set the upper and lower limits of the BGS density while monitoring the image.
BGS changes image areas with densities below the lower limit to 0, and image
areas with densities above the upper limit to 255. Image areas with densities
between the lower and upper limits are graded from 0 to 255 so that only
images with densities between the lower and upper limits are measured.
Example: Lower limit set to 100 and upper limit set to 220
• Images with densities set to less than 100 are not measured and the den-
sity becomes 0.
• Only images with densities between 100 and 220 are measured and the
images are graded between 0 and 255.
1. Select BGS levels.
The settings screen for BGS levels will be displayed.
2. Move the cursor to the upper value and use the Left and Right Keys to ad-
just the value.
Right Key: Increases the lowest digit by one.
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key: Decreases the lowest digit by one.
Background
Measurement object
Background density (cut)
Measurement density
0
255
Lower limit: 100
Upper limit: 220
4.Filtering again
Direction
Filtering order
Filtering
BGS levels
Upper[ 255 ]
Lower[ 0 ]
:Move :Change
BGS levels
OK