Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 312 / 999

2-14-(14)
Density Defects Section 2-14
tion points so the measurement region can be adapted to suit if the size or
position of the measurement object changes.
SeeAlso
Refer to page 2-14-(4).
STEP 1: Setting Measurement Conditions
Set the conditions for calculating density changes in measurement regions.
The settings are the same as for Defect (Line, Circum, Arc, and Region),
except for the measurement direction.
SeeAlso
Refer to page 2-14-(6).
1
2
3 4 5
Set mea-
surement
conditions. Set mea-
surement
region. Register
reference
values. Set
judgement
conditions. Change
detection
conditions.
(As required) (As required)
Measurement
direction
Application
Box
X line
Y line
Measurement region
+
+
+ +
Select to detect the defects for
the whole measurement region.
Calculates the variation in den-
sity in the X direction and Y
direction.
Measurement region
+
+
+
+
+
+
+
Select to detect defects or burrs
in the upper or lower section of
the measurement region.
Refer to page 2-14-(19).
Calculates the variation in den-
sity in the X direction.
Measurement region
+
+
+
+ +
+
+
Select to detect defects or burrs
in the right or left section of the
measurement region.
Refer to page 2-14-(20).
Calculates the variation in den-
sity in the Y direction.