Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 75 / 999

2-1-(2)
Inputting Camera Images Section 2-1
2-1-1 Camera Settings
2-1-1-1 Shutter Speed
Change the shutter speed when the object is moving quickly, causing the
image to be blurred.
The shutter speed can be changed from the menu for F150-S1A and F160-S1
Cameras only.
Refer to
6(&7,21 %DVLF2SHUDWLQJ3URFHGXUHV
for information on shutter
speed operations.
2-1-1-2 Lighting Control
When using Cameras with Intelligent Lighting, the light level can be adjusted
from the Controller.
Refer to
6(&7,21%DVLF2SHUDWLQJ3URFHGXUHV
for information on lighting
control operations.
2-1-1-3 Calibration
Calibration can be set to output the measurement results in physical units.
There are four settings for calibration: Sampling, Specifying point, Specifying
coordinate axis, and Parameter input.
HELP
Refer to
7HUPLQRORJ\
for information on calibration.
CHECK
To output measurement results in physical units, set Coordinate mode/Calibra-
tion to ON for each processing item.
If Calibration remains set to OFF, the default settings will remain, and mea-
surements using the Camera coordinates will be output.
Sampling The sampling function is used to set calibration based on measurement
results. Register a model, and perform a sample measurement to obtain the
position. (The position will be obtained in sub-pixel units.) Enter the physical
coordinates of the position of the model. The calibration will be calculated
automatically. Sample measurements can be made in up to 3 places.
• When the magnifications are the same for the X and the Y directions,
make sample measurements in 2 places only.
• When the magnifications in the X and Y directions are different, perform
sampling measurement in 3 places.