Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 183 / 999

2-7-(7)
Edge Position Compensation Section 2-7
The Judgement Conditions Settings Screen will be displayed.
2. Change the settings.
3. Select End.
The settings will be registered and the screen in (1.) will return.
2-7-2-5 STEP 5: Changing Detailed Conditions
Change the detailed conditions when the measurement results are unstable.
Normally, these conditions can be left on the default settings. After changing
the settings, perform an object measurement to check that measurement can
still be performed correctly.
1. Select Detailed conditions.
The Detailed Conditions Settings Screen will be displayed.
2. Change the settings.
Refer to the information on edge level, noise level, and noise width below
for details.
3. Select End.
The settings will be registered and the screen in (1.) will return.
Judgement conditions
End
Position X: 95.000
[ 0.000:
511.000 ]
Position Y: 95.000
[ 0.000: 483.000
]
Position compensation 0
Measurement conditions
Region
Reference registration
Judgement conditions
Detailed conditions
Clear
Detailed conditions
End
Edge level :[ 50]%
Noise level :[ 20]
Noise width:[ 0]pix