Omron F250-UME, Руководство пользователя программного обеспечения

Страница: 53 / 999

1-(45)
Basic Operations Section 1-6
1-6-3-2 Changing Labeling Conditions
When Labeling area is selected as the defect inspection method, the following
labeling conditions can be changed to match the inspection goals.
1. Select Labeling.
End
Labeling
Area :
[ 0.000 : 247808.000 ]
Sort :
Area descending order
Label No. :[ 0]
Conditions for reassigning label numbers
Area descending order:*
Area ascending:
Gravity X descending:
Gravity X ascending:
Gravity Y descending:
Gravity Y ascending:
Sorts in descending order by area.
Sorts in ascending order by area.
Sorts in descending order by center of gravity X coordinate. (See note.)
Sorts in ascending order by center of gravity X coordinate. (See note.)
Sorts in descending order by center of gravity Y coordinate. (See note.)
Sorts in ascending order by center of gravity Y coordinate. (See note.)
Note When X and Y center of gravity are sorted, the upper left corner of the screen is the origin.
Sort example:
0
X
Y
Labeling result
Label numbers in
descending order
by area
Label numbers in
ascending order by
X center of gravity
0
2 2 0 1 1
0
2
1
Label numbers in
descending order by
Y center of gravity
Area range for labels (0 to 9,999,999.999 (0 to 247,808.000*))
Label number for which to inspect for defects (0 to 999 (0*))
The coordinate system set under
calibration will not be affected.
The asterisk (*) indicates the default setting.
1.Fine matching
Measurement conditions
Labeling
Model registration
Judgement conditions
Differencial image
Detailed conditions
Coordinate mode
Model reference