manualshive.com logo in svg

Infineon Technologies TC1796, User Manual

The User Manual for the Infineon Technologies TC1796 is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and optimizing the TC1796 product. Dive into the features and functionalities of this advanced technology by downloading the manual from manualshive.com.

Share
Download
background image

User’s Manual

L-12

V2.0, 2007-07

 

TC1796

System and Peripheral Units (Vol. 1 and 2)

Table of Contents

 

11.11.9

CLR, Clear Bit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-83 [1]

11.11.10

COMP, 32-Bit Compare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-84 [1]

11.11.11

COPY, DMA Instruction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-85 [1]

11.11.12

DEBUG, Debug Instruction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-86 [1]

11.11.13

DINIT, Divide Initialization Instruction   . . . . . . . . . . . . . . . . . . . . .  11-87 [1]

11.11.14

DSTEP, Divide Instruction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-88 [1]

11.11.15

INB, Insert Bit   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-88 [1]

11.11.16

EXIT, Exit Instruction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-89 [1]

11.11.17

JC, Jump Conditionally   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-90 [1]

11.11.18

JL, Jump Long Unconditional   . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-91 [1]

11.11.19

LD, Load   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-91 [1]

11.11.20

LDL, Load 16-bit Value   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-93 [1]

11.11.21

Multiply Initialization Instruction  . . . . . . . . . . . . . . . . . . . . . . . . . .  11-93 [1]

11.11.22

MOV, Move Register to Register  . . . . . . . . . . . . . . . . . . . . . . . . .  11-94 [1]

11.11.23

Multiply Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-95 [1]

11.11.24

NEG, Negate  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-96 [1]

11.11.25

NOP, No Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-96 [1]

11.11.26

NOT, Logical NOT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-96 [1]

11.11.27

OR, Logical OR  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-97 [1]

11.11.28

PRI, Prioritize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-98 [1]

11.11.29

PRAM Bit Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-99 [1]

11.11.30

RL, Rotate Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-100 [1]

11.11.31

RR, Rotate Right  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-100 [1]

11.11.32

SET, Set Bit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-101 [1]

11.11.33

SHL, Shift Left  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-101 [1]

11.11.34

SHR, Shift Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-102 [1]

11.11.35

ST, Store  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-103 [1]

11.11.36

SUB, 32-Bit Subtract  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-104 [1]

11.11.37

XCH, Exchange  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-105 [1]

11.11.38

XOR, 32-Bit Logical Exclusive OR . . . . . . . . . . . . . . . . . . . . . . .  11-106 [1]

11.11.39

Flag Updates of Instructions   . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-107 [1]

11.11.40

Instruction Timing   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-108 [1]

11.12

Programming of the PCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-112 [1]

11.12.1

Initial PC of a channel program  . . . . . . . . . . . . . . . . . . . . . . . . .  11-112 [1]

11.12.1.1

Channel Entry Table   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-112 [1]

11.12.1.2

Channel Resume  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-113 [1]

11.12.2

Channel Management for Small and Minimum Contexts   . . . . .  11-114 [1]

11.12.3

Unused Registers as Globals or Constants . . . . . . . . . . . . . . . .  11-114 [1]

11.12.4

Dispatch of Low Priority Tasks   . . . . . . . . . . . . . . . . . . . . . . . . .  11-115 [1]

11.12.5

Code Reuse Across Channels (Call and Return)   . . . . . . . . . . .  11-115 [1]

11.12.6

Case-like Code Switches (Computed Go-To)  . . . . . . . . . . . . . .  11-116 [1]

11.12.7

Simple DMA Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-116 [1]

11.12.7.1

COPY Instruction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-116 [1]

Summary of Contents for TC1796







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for TC1796

Wasp B2000 Installation Manual preview
B2000
Brand: Wasp Pages: 16
Balboa GL Series User Manual preview
GL Series
Brand: Balboa Pages: 12
Paoli F1 Operating And Maintenance Manual preview
F1
Brand: Paoli Pages: 16
Danfoss VLT AQUA Drive FC 202 Installation Manual preview
VLT AQUA Drive FC 202
Brand: Danfoss Pages: 124
Danfoss AME 55 Installation Manual preview
AME 55
Brand: Danfoss Pages: 2
Danfoss AME 110 NL Datasheet preview
AME 110 NL
Brand: Danfoss Pages: 8
Danfoss AK-CH 650 User Manual preview
AK-CH 650
Brand: Danfoss Pages: 114
Danfoss ECL Comfort 300 Quick Manual preview
ECL Comfort 300
Brand: Danfoss Pages: 2
Danfoss TS715Si Installation Manual preview
TS715Si
Brand: Danfoss Pages: 16
Danfoss AME 438 SU Installation Manual preview
AME 438 SU
Brand: Danfoss Pages: 24
Danfoss AK-LM 330 User Manual preview
AK-LM 330
Brand: Danfoss Pages: 8
Danfoss ECL Comfort 296 Operating Manual preview
ECL Comfort 296
Brand: Danfoss Pages: 159
Danfoss VLT AutomationDrive FC 301 Operating Manual preview
VLT AutomationDrive FC 301
Brand: Danfoss Pages: 78
Danfoss AME 335 Installation Manual preview
AME 335
Brand: Danfoss Pages: 20
Danfoss ECL Comfort 210 User Manual preview
ECL Comfort 210
Brand: Danfoss Pages: 12
Danfoss ECL Comfort 110 Mounting Manual preview
ECL Comfort 110
Brand: Danfoss Pages: 8
Danfoss ECL Comfort 100M User'S Manual And Installation Instructions preview
ECL Comfort 100M
Brand: Danfoss Pages: 21
Danfoss AFQM Operating Manual preview
AFQM
Brand: Danfoss Pages: 16

Brands by name

Popular brands

Load more brands