manualshive.com logo in svg

Infineon Technologies TC1796, User Manual

Share
Download
Infineon Technologies TC1796 User Manual Download Page 53

TC1796

System Units (Vol. 1 of 2)

Introduction

 

User’s Manual

1-14

V2.0, 2007-07

Intro, V2.0

 

1.3

On-Chip Peripheral Units of the TC1796

The TC1796 microcontroller offers several versatile on-chip peripheral units such as
serial controllers, timer units, and Analog-to-Digital converters. Several I/O lines on the
TC1796 ports are reserved for these peripheral units to communicate with the external
world.
The peripherals mentioned in this overview section are all described in detail in the
chapters of the “TC1796 Peripheral Units (Vol. 2 of 2) User’s Manual” part.

1.3.1

Serial Interfaces

The TC1796 includes eight + four (CAN) serial peripheral interface units:
•

Two Asynchronous/Synchronous Serial Interfaces (ASC0 and ASC1)

•

Two high-speed Synchronous Serial Interfaces (SSC0 and SSC1)

•

Two Micro Second Channel Interfaces (MSC0 and MSC1)

•

Two Micro Link Serial Bus Interfaces (MLI0 and MLI1) dedicated for the
communication between two controllers of the TriCore family.

•

One MultiCAN Interface with 4 CAN nodes

Summary of Contents for TC1796







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands