manualshive.com logo in svg

Data I/O UniSite-xpi, User Manual, Page: 405 / 413

Share
Download
Data I/O UniSite-xpi User Manual Download Page 405

Index

UniSite-xpi User Manual

Index-3

Download End-of-file Delimiter

Edit Communication Parameters,  4-36

Download Host Command

Compare Data,  4-88
default setting,  4-85
Download Data,  4-85
Edit Communication Parameters,  4-36

Drives,  1-3
Duplicate Boot Files disk, after first use,  2-25
Duplicate Disk

after first use,  1-5
overview,  4-78
suggestions,  4-78

Duplicate System disk, after first use,  2-25

E

Edit Address Offset

Edit Memory Data,  4-68

Edit Begin Address

Edit Memory Data,  4-68

Edit Begin Vector

Edit Test Vectors,  4-64

Edit Communication Parameters,  4-36
Edit Data

logic devices,  4-62
memory devices,  4-67
overview,  4-62
session on,  3-54

Edit Data Word Width

Edit Memory Data,  4-68

Edit Fuse Map, editor commands,  4-63
Edit Memory Data

editor commands,  4-69
overview,  4-68

Edit Programmer Memory,  4-68
Edit Programming Parameters,  4-27
Edit Vector,  4-64
EE Bulk Erase

Device Checks,  4-53

Electrical shock, avoiding,  2-17
Electromagnetic Interference (EMI),  1-7
Electromagnetic Interference, minimizing,  2-14
Electronically Erase Device,  4-60
Electrostatic Discharge,  1-7
Enable CTS/DTR

Edit Serial Port Configuration,  4-33

Enable Terminal Beeps

Edit Interface Parameters,  4-38

Enable Yield Tally

Program Logic Device,  4-14
Program Memory Device,  4-19

End User Change,  xviii

Enhanced Security Fuse Capability,  4-19
Environmental specifications,  1-6
Erase EE Device

Edit Programming Parameters,  4-30
Program Memory Device,  4-19

Extended algorithms

algorithm source,  4-28
selecting,  4-7

Extended CRC Commands, list,  5-8
External Features,  1-3

F

Factory default settings,  4-3
Features

back panel,  1-4
front panel,  1-3

Fields, special parameters,  4-8
File menu,  3-43
File Operations,  4-73
Filename

Compare Data,  4-87
Download Data,  4-84
Edit Fuse Map,  4-63
Edit Memory Data,  4-68
Edit Test Vectors,  4-64
Input from Disk,  4-89
Load File,  4-74
Output Logic Data,  4-92
Output Memory Data,  4-91
Output to Disk,  4-90
Save File,  4-75
Upload Data,  4-85
wildcards,  4-78

Fill Data

Edit Communication Parameters,  4-35

Fill Fuse Map,  4-67
Fill Memory Option

Edit Communication Parameters,  4-34
overview,  4-72

Fill Programmer Fuse Map,  4-67
Fill Programmer Memory,  4-72
Fill Variable, Fill Data,  4-72
For Member X of Y

Sumcheck Memory Device,  4-56

Format Disk,  4-79
Format Select,  4-88
Frequency range,  1-6
From Memory Address, Move Data,  4-72
FSM,  7-1
Functional specifications,  1-6
Fuse, replacing,  2-40

Summary of Contents for UniSite-xpi






























































































































































































































































































































































































































Reviews:

No comments