Data I/O UniSite-xpi, User Manual

Page: 204 / 413

4. Commands
4-70 UniSite-xpi User Manual
Search Pattern C
TRL
+ F Allows you to search for a particular hex
pattern of up to 8 digits:
1. Press C
TRL
+ F. The cursor moves to
the Search field at the bottom of the
screen.
2. Type in the pattern to search for (any
hex value up to 8 digits), followed by
E
NTER
. If the pattern cannot be
found, a message is displayed and
the cursor remains in its original
position.
When searching for data in 4-bit mode,
the upper nibble of data is blank so only
up to four characters can be entered in
the search field.
Start/Stop Insert C
TRL
+ T Toggles the state of the Insert mode
between Insert and Overtype. If the
Insert field is displayed in reverse video,
the editor is in Insert mode. If the Insert
field is displayed in normal video, the
editor is in Overtype mode.
In Insert mode, data is inserted at the
current cursor position, and all data after
that is moved up into higher memory or
file addresses. If editing a RAM file, data
at the end of RAM is lost. If editing a
disk file, the file gets larger. The insert is
not complete until the last hexadecimal
character (8- or 16-bit) is entered. The
cursor moves by byte for 8-bit data, or
by word for 16-bit data.
In Overtype mode, data entered replaces
the current data. When not in Insert
mode, the arrow keys move the cursor
by character.
For 8-bit data, the data is entered in
bytes, and for 16-bit data, the data is
entered in words.
Exit Editor F2 Exits the memory editor and returns
UniSite-xpi to the Edit menu.
Command Keystrokes Description