Data I/O UniSite-xpi, User Manual

Page: 200 / 413

4. Commands
4-66 UniSite-xpi User Manual
Vector Editor
Commands
Command Keystrokes Description
Jump to Vector C
TRL
+ B Moves the cursor to a specific vector. A
highlighted field appears just after the
^B: Jump to Vector
prompt at the
bottom of the screen. Enter the vector
number to jump to and press E
NTER
.
Delete Vector C
TRL
+ D Deletes the current vector where the
cursor is located.
Insert Default C
TRL
+ I Inserts a default vector, which consists
of a vector of all Xs (the character that
expresses the ignore input and output
test condition). Use the default vector
for creating new test vectors. To create
a new test vector, insert a default
vector and change that vector to
contain the test conditions that you
specify; the legal test conditions are
listed in the previous table. When you
enter this command, the default vector
is placed in front of the vector
highlighted by the cursor.
Next Block C
TRL
+ N Displays the next block of vectors.
Prev Block C
TRL
+ P Displays the previous block of vectors.
Restore Block C
TRL
+ U Restores the current page of vector
data to its original state (before editing
this page began). Only the data visible
on the screen is affected by this
command. This command is effective
only if there have been no paging
commands since changes were made.
Save Vector C
TRL
+ W Saves the current vector (at the cursor)
to a temporary buffer.
Repeat Saved C
TRL
+ V Inserts the vector that was last saved
using the C
TRL
+ W command. When
you execute this command, the saved
vector is placed in front of the vector
highlighted by the cursor.
Exit Editor F2 Exits the vector editor and returns to
the previous screen.