Data I/O UniSite-xpi, User Manual

Page: 184 / 413

4. Commands
4-50 UniSite-xpi User Manual
6. If prompted, insert the Algorithm disk that contains the algorithm
you wish to add. (If you do not have the correct disk inserted, the
programmer will prompt you for the disk to insert when it is
necessary.)
If you get the message
Cannot access file_name.sys
the
programmer could not find a file on the disk in the programmer’s
drive. Insert the Algorithm disk that contains the file.
7. Select additional devices from the current screen (or press F2 to
return to the manufacturer list if you were selecting devices from a
manufacturers list) or press F2 (once or more if necessary) to return to
the Add screen in order to select a different algorithm media or
algorithm source. Repeat steps 2 through 6 as necessary.
When you are done adding devices, press F2 twice until you are
prompted to insert the Custom Menu disk.
8. Insert the Custom Menu disk and press E
NTER
to save your changes
to disk.
View This command displays the contents of a Custom Menu.
To view a Custom Menu, follow these steps:
1. Select the View command.
2. Insert the disk that contains your Custom Menu and press E
NTER
to
continue. Follow the directions on the screen (inserting disks if
prompted).
When you are done viewing the Custom Menu, press F2 to return to
the Custom Menu Algs menu.
Delete This command displays the Delete screen, which allows you to delete
devices from a Custom Menu.
To delete devices from a Custom Menu, follow these steps:
1. Select the Delete command.
2. Insert the disk that contains your Custom Menu and press E
NTER
to
continue. Follow the directions on the screen (inserting disks if
prompted).
More
Com-
mands Custom
Menu Algs
View
Configure
System
More
Com-
mands Custom
Menu Algs
Delete
Configure
System