Mitsubishi Electric Melservo-J3 Series MR-J3-B, Instruction Manual

Page: 742 / 802

17 - 57
17. SPEED CONTROL OPERATION
No. Symbol Name and function
Initial
value
Unit
Setting
Range
PD13 For manufacturer setting
Do not change this value by any means. 0000h
PD14 Not used in speed control operation.
Do not change the parameter. 0800h
PD15 For manufacturer setting
Do not change this value by any means. 0000h
PD16 Not used in speed control operation.
Do not change the parameter. 0000h
PD17 For manufacturer setting 0000h
PD18 Do not change this value by any means. 0000h
PD19 *DIF Input filter setting
Select the input filter.
0 0 0
Input filter
If external input signal causes chattering due
to noise, etc., input filter is used to suppress it.
0: None
1: 0.888[ms]
2: 1.777[ms]
3: 2.660[ms]
4: 3.555[ms]
5: 4.444[ms]
0002h Refer to
the
Name
and
function
column.
PD20 *DOP1 Function selection D-1
Select the stop processing at the time when the forward rotation stroke end
(LSP)/reverse rotation stroke end (LSN) is off, and select the base circuit
status at the time when the reset (RY(N+1)A or RY(n+3)A) is on.
0 0
Stopping method for Forward rotation stroke end
(LSP) off or Reverse rotation stroke end (LSN) off
0: Sudden stop
1: Slow stop
Selection of base circuit status at reset (RY(n+1)A or
RY(n+3)A) on
0: Base circuit shut off
1: Base circuit not shut off
0010h Refer to
the
Name
and
function
column.
PD21 For manufacturer setting
Do not change this value by any means. 0000h
PD22 Not used in speed control operation.
Do not change the parameter. 0000h
PD23 For manufacturer setting
Do not change this value by any means. 0000h