Mitsubishi Electric Melservo-J3 Series MR-J3-B, Instruction Manual

Page: 243 / 802

6 - 2
6. PARAMETERS
6.1.2 Parameter write inhibit
Parameter Initial
value
Unit Setting range
No. Symbol Name
PA19 *BLK Parameter write inhibit 000Ch Refer to the text.
POINT
This parameter is made valid when power is switched off, then on after
setting.
In the factory setting, this servo amplifier allows changes to the basic setting parameter, gain/filter parameter
and extension setting parameter settings. With the setting of parameter No.PA19, write can be disabled to
prevent accidental changes.
The following table indicates the parameters which are enabled for reference and write by the setting of
parameter No.PA19. Operation can be performed for the parameters marked .
Parameter No.PA19
setting
Setting operation
Basic setting
parameters
No.PA
Gain/Filter
parameters
No.PB
Extension setting
parameters
No.PC
I/O setting
parameters
No.PD
0000h
Reference
Write
000Bh
Reference
Write
000Ch
(initial value)
Reference
Write
100Bh
Reference
Write
Parameter No.
PA19 only
100Ch
Reference
Write
Parameter No.
PA19 only