Mitsubishi Electric Melservo-J3 Series MR-J3-B, Instruction Manual

Page: 741 / 802

17 - 56
17. SPEED CONTROL OPERATION
No. Symbol Name and function
Initial
value
Unit
Setting
Range
PD03 *DIA3 Input signal automatic on selection 3
Select input devices to turn on automatically.
The
indicates the manufacturer setting. Never change the setting.
0
0 0
0
0
0
0
0
0
0
0
0
BIN 0: Use for CC-Link
BIN 1: Automatic on
Speed selection3(SP2)
Speed selection2(SP1)
Speed selection1(SP0)
Device name
Initial value
BIN HEX
Acceleration/deceleration
selection(STAB)
Device name
Initial value
BIN HEX
For example, when speed acceleration/deceleration selection (RYnD) is
turned on, the setting value is " 1
".
0000h Refer to
the
Name
and
function
column.
PD04 Not used in speed control operation. 0000h
Do not change the parameter.
PD05 For manufacturer setting
Do not change this value by any means. 0000h
PD06 Not used in speed control operation. 002Bh
PD07 Do not change the parameter. 000Ah
PD08 000Bh
PD09 0002h
PD10 0003h
PD11 0024h
PD12 *DIN1 External DI function selection 1
Set any signal read from the CN6 connector.
The
indicates the manufacturer setting. Never change the setting.
1
C
0 0 0
Initial value
BIN
HEX
Device name
Forward rotation
stroke end
0
1
0
Reverse rotation
stroke end
BIN 0: Use for CC-Link
BIN 1: Use for CN6 connector
external input signal
0C00h Refer to
the
Name
and
function
column.