Mitsubishi Electric Melservo-J3 Series MR-J3-B, Instruction Manual

Page: 635 / 802

16 - 80
16. INDEXER POSITIONING OPERATION
(b) Auto tuning response (parameter No.PA09)
If the machine hunts or generates large gear sound, decrease the set value. To improve performance,
e.g. shorten the settling time, increase the set value.
Setting Response
Guideline for machine
resonance frequency [Hz]
Setting Response
Guideline for machine
resonance frequency [Hz]
1 Low response 10.0 17 Low response 67.1
2 11.3 18 75.6
3 12.7 19 85.2
4 14.3 20 95.9
5 16.1 21 108.0
6 18.1 22 121.7
7 20.4 23 137.1
8 23.0 24 154.4
9 25.9 25 173.9
10 29.2 26 195.9
11 32.9 27 220.6
12 37.0 28 248.5
13 41.7 29 279.9
14 47.0 30 315.3
15 52.9 31 355.1
16 Middle response 59.6 32 Middle response 400.0
(9) In-position range
Parameter
Initial
value
Unit Setting range
No. Symbol Name
PA10 INP In-position range 100 pulse 0 to 10000
Set the range for outputting travel completion (RXnC) and in-position (RXn1) in command pulse unit.
Servo motor Droop pulse
In-position range [pulse]
Command pulse
Command pulse
Droop pulse
In position (RXn1)
ON
OFF