Mitsubishi Electric Melservo-J3 Series MR-J3-B, Instruction Manual

Page: 497 / 802

14 - 88
14. OPTIONS AND AUXILIARY EQUIPMENT
(c) Cable clamp fitting AERSBAN - SET
Generally, the grounding of the shielded wire may only be connected to the connector's SD terminal.
However, the effect can be increased by directly connecting the cable to a ground plate as shown below.
Install the ground plate near the servo amplifier for the encoder cable. Peel part of the cable sheath to
expose the external conductor, and press that part against the ground plate with the cable clamp. If the
cable is thin, clamp several cables in a bunch.
The clamp comes as a set with the ground plate.
[Unit: mm]
4
0
Cable clamp
(A, B)
Cable
Ground plate
cutter
cable
Strip the cable sheath of
the clamped area.
External conductor
Clamp section diagram
Outline drawing
[Unit: mm]
3
7
C A
6
6
Ground plate
2- 5 hole
mounting hole
17.5
24
0 -0
.2
B ± 0
.3
(Note) M4 screw
35
35
22
11
[Unit: mm]
30
10
24
+0.
3
0
Clamp Section diagram
L or less
Note. Screw hole for grounding. Connect it to the ground plate of the control box.
Type A B C Accessory fittings Clamp fitting L
AERSBAN-DSET 100 86 30 Clamp A: 2pcs. A 70
AERSBAN-ESET 70 56 Clamp B: 1pc. B 45