Mitsubishi Electric Melservo-J3 Series MR-J3-B, Instruction Manual

Page: 53 / 802

1 - 34
1. FUNCTIONS AND CONFIGURATION
1.8 Selection of operation method
Using the CC-Link communication functions, this servo enables a wide variety of operation methods. The
operation method changes depending on the input device, parameter and point table setting.
The flow of the operation method that changes depending on the device and parameter setting status is shown
in the chart for your reference.
(Refer to section 3.2.5)
RY of CC-Link-based
point table No. setting
auxiliary function valid
(Refer to section 5.4.)
OFF
ON
Parameter No.PA30
0
1
2
Remote register-based
point table No. setting
auxiliary function invalid
Remote register-based
position data setting/point
table No. (speed) setting
auxiliary function invalid
Remote register-based
position data/speed data
setting auxiliary function
invalid
1 station
occupied
MR-J3-T occupied
station count setting
switch SW1
Servo amplifier
MR-J3-T
Position/speed
specifying system selection
(RY(n+2)A)
2 stations
occupied