Hitachi Compute Blade 2000, User Manual

Page: 612 / 1927

561
6
Manag
eme
nt
Modul
e S
ett
in
gs

LFT command
You can set redundancy at the management LAN port. Enter
LFT
at the prompt, and
press
Enter
. (LFT: Link Fault Tolerance)
Select a menu item in the table below to execute the function.
Menu Description
Z.
Edit management 0 port
setting.
Edit redundancy setting on MGMT0 port of the
management module.
O.
Edit management1 port
setting.
Edit redundancy setting on MGMT1 port of the
management module.
Q. Quit. Quits the LFT command.
Items on the screen are described in the table below.
Menu Description
Ext port
External output port
MGMT-0: MGMT0 port; MTGMT-1: MGMT1 port; MNT:
MAINT port
Management module
Which management module has open ports:
Active or Standby
LFT
Redundancy function of the management LAN port:
Enable or Disable
Down(s)
How many seconds it takes to ascertain that the external
output port is linkdown: specify 1 to 3600 seconds.
Up(s)
How many seconds it takes to ascertain that the external
output port is linkup: specify 1 to 3600 seconds.
5713RF0 NNNNN(0)SVP> LFT (Enter)
<< LFT - Link Fault Tolerance setting. >>
-- Link Fault Tolerance setting --
Ext port Management module LFT Down(s) Up(s)
-------- ----------------- ------- ------- -----
MGMT-0 Active Enable 3 180
MGMT-1 Active Enable 3 180
MNT Active Enable 3 180
-- Link Fault Tolerance setting menu --
Z. Edit management0 port setting.
O. Edit management1 port setting.
Q. Quit.
(Z,O,[Q]) :