Hitachi Compute Blade 2000, User Manual

Page: 623 / 1927

572
6
Manag
eme
nt
Modul
e S
ett
in
gs
If you enter
S
in the BSM command menu and press Enter , the current port number
setting that receives requests from SC/BSM appears. At the prompt, press Enter or
enter a port number and press Enter . The changed setting value is displayed. A
confirmation message appears. At the prompt, enter
Y
and press Enter , and the port
number setting is saved. To cancel the setting, enter
N
and press
Enter
, or just press
Enter
.
The port used for connecting to SC/BSM will be closed when you perform the following
setting.
1. Delete all managers for notification set in the management module.
2. Type
0
into the port number set in the management module to receive requests
from SC/BSM.
If you enter
DM
in the
BSM command
menu and press
Enter
, you are asked to select
SC/BSM connection setting. At the prompt, enter the SC/BSM connection setting
number specified, and the current setting is displayed.
Select a menu item in the table below to execute the function.
Menu Description
S. Edit setting. Edits details of SC/BSM connection setting.
Q. Quit Returns to the previous menu.
(S,[Q]) : S (Enter)
Command port : 21001
(1-65535,[Unchange]) : 21002 (Enter)
-- Basis detail setting --
Command port : 21002
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
(M,D,DB,DM,T,[Q]) : DM (Enter)
Select manager (0-3,[Q=Quit]) : 1 (Enter)
-- Manager detail setting --
No. : 1
Name : BSM_1
IP address : 192.168. 0.253
Alert port : 20079
Alert level : Alert
Retry interval (sec) : 5
Retry duration (min) : 10
-- Manager setting menu --
S. Edit setting.
Q. Quit.
(S,[Q]) :
(S,[Q]) : S (Enter)
Command port : 21001
(1-65535,[Unchange]) : 21002 (Enter)
-- Basis detail setting --
Command port : 21002
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)