Hitachi Compute Blade 2000, User Manual

Page: 320 / 1927

269
5
Server B
lad
e S
etup
Display item What is displayed Setting/display value **
A RAID Level RAID level -
Status Status of the disk array -
Strip Size Stripe size of the disk array -
Capacity Size of the disk array -
B Access Access mode [RW (reading and writing)] /
Read Only (reading only) /
Blocked (access denied)
C Read Read policy [Normal (no advance reading)] / Ahead
(always advance reading) / Adaptive
(advance reading only in the event of
sequential access)
D Disk Cache Setting the cache installed
in a physical hard disk
[Disable (cache: not used)] /
[Enable (cache: used) /
No change (based on the hard disk setting)]
E I/O Setting the read-cache
operation
[Direct (reading from the cache at a cache
hit)] /
[Cached (always reading from the cache)]
F Disable BGI Setting the background
initializing
No (background initializing valid) / [Yes
(background initializing invalid)]
G Default Write*1 Setting the write cache [Write Through (write cache invalid)] /
Always Write Back (write-cache valid) /
Write Back with BBU (Write cache is valid
only when the battery is installed.)
*1 Default Write supports setting in Always Write Back only when the system equipment is
connected to UPS. Even so, set Write through when installing OS. Otherwise, the installation
may not finish properly. Do not set Write Back with BBU .