Hitachi Compute Blade 2000, User Manual

Page: 694 / 1927

643
6
Manag
eme
nt
Modul
e S
ett
in
gs
Backing up and restoring settings

DC command
Restores settings to factory defaults. For server blades, only information that is set on
the following screens of the server blade Web console is initialized.
Language setting
Configuration of network
User account settings
Enter
DC
at the prompt, and press Enter .
Select a menu item from the following list to execute the function.
Menu Description
R. Restore factory setting. Restores the settings of the management module to the
factory defaults.
B. Reset server blade web
console setting.
Resets the settings for the server blade web console.
Information set on the following screens is reset.
-
Language setting
-
Configuration of network
-
User account settings
H. Reset LP setting. Reset the LPAR manager configuration information to the
factory settings.
Q. Quit Quits the DC command.
If you enter
R
at the DC command menu and press Enter , a warning message
appears indicating that if you proceed, the current session will be terminated and the
management module will restart with the factory defaults. To restore the management
module to the defaults and restart, enter
Y
at the confirmation prompt and press Enter .
To cancel the operation, at the confirmation prompt, enter
N
and then press Enter , or
simply press Enter .
5713RF0 NNNNN(0)SVP> DC(Enter)
<< DC - Restore factory setting. >>
-- Restore setting menu --
R. Restore factory setting.
B. Reset server blade web console setting.
H. Reset LP setting.
Q. Quit.
(R,B,H,[Q]) :
(R,B,H,[Q]) : R (Enter)
WARNING : If confirm, this connect is lost.
Confirm? (Y,[N]) : Y (Enter)
- <Management module0> Restarting