Hitachi Compute Blade 2000, User Manual

Page: 1251 / 1927

1200
12
Log
ical
par
titio
ni
ng man
age
r
# Title
Official
Name
Description
Initial Value
(When LPAR is
added)
(10) Function Key Function Key Displays the function keys that can be used in this
screen.
F2: Displays the list of assigned VLAN ID.
F5: Used to set the promiscuous mode.
F6: Used to change MAC addresses.
F7: Used to set the VLAN mode.
For LPAR manager firmware 57-30 or later
versions:
F8 is used for setting Inter-LPAR Packet Filtering.
For LPAR manager firmware 59-7X/79-7X or later
versions
F9: Used to set transmission bandwidth limitation for VF
NIC.
Sets from 100 Mbps to 10000 Mbps by the 100 Mbps.
For LPAR manager firmware 58-71/78-71 or later in
LPAR manager expansion mode:
F11: Scrolls the screen to the left.
F12: Scrolls the screen to the right .
-
(11) Error event
detected
Error event
detection
Displays that LP system logs at the error level are
detected.
When this is displayed, check the LP system log in the
LP System Logs screen.
See
LP system logs for checking LP system logs.
To delete this display, press the Esc key with this
screen or open the system logs screen.
-
# Title
Guest status
Remarks
Activated Deactivated Failure
(1) # - - - Display only
(2) Name - - - Display only
(3) Sta - - - Display only
(4) #VNIC - - - Display only
(5) Device
-

-
LPAR manager firmware version
59-0X/79-0X or later
(6) VNIC Number - - - Display only
(7) VNIC
Assignment
-

-
(8) PageUP/
PageDown
keys
- - -
Display only
(9) VNIC Information for Shared NIC/Virtual NIC
MAC
Address
-  -
Tag
 
-
Prm   -
VLANID   -
Inter-LPAR
Packet
Filtering
  -
LPAR manager firmware 57-30 or
later versions.