Hitachi Compute Blade 2000, User Manual

Page: 1611 / 1927

1560
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
(4) Executing the e-mailing test
Execute the e-mailing test using e-mail notification by manual operation (the
current status).
 Select e-mail notification > Operation > E-mail notification by manual
operation (management LAN) to execute the test.
 Select the destination address from the list. You can select a specific
address or all addresses.
 An inquiry to confirm the e-mail notification, execute it if no problem.
 Logs are collected and then the e-mail notification is executed. Confirm
that the e-mail has reached to the destination address.

Collecting logs takes a few minutes.

E-mail notification is to finish when the e-mail has
been properly transmitted to the mail server.

When the e-mail is sent to multiple destinations in the
test, the email may fail to reach all destinations even if
it fails to reach one destination fails.

If the mailing test fails, review the environment and
settings referring to the following description and
correct them as necessary.

Check if communication between the
management module and the mail server is
available.
- If not, check that the LAN cable is properly
connected.
- Check the network setting of the management
module.
- You need to specify DNS in the network setting
of the management module when specifying the
mail server as the host name.

Check if the SMTP service is running on the
SMTP server.

Check if the basic information and destination
information are properly configured.
The following table describes messages showing results from e-mail notification
triggered by manual operation.
Message
Description
The operation for e-mail address % was successful.
Description: The e-mail notification was successfully sent.
Checking and Action: None.
The operation for e-mail address % failed. The IP address could not be resolved from
the host name.
Description: Failed to obtain an IP address name from the SMTP host name.
Checking and Action: Check the e-mail notification setting (SMTP). Check the network
setting (DNS: domain name system). Check the connection to LAN.
The operation for e-mail address % failed. The format of the IP address is invalid.