Hitachi Compute Blade 2000, User Manual

Page: 910 / 1927

859
10
Co
nfig
ur
in
g t
he
Fibr
e Ch
annel
Switc
h Module
Connection to setup terminal
A setup terminal connected via a local area network (LAN) or serial cable is initially required.
This section describes how to connect a terminal to the module in each method.
LAN interface connection
You can access the built-in Fibre-channel switch through the LAN port of the
management module or the LAN port of the built-in Fibre-channel switch for managing
the built-in Fibre-channel switch. You can determine which LAN port to use and set it
by using the LAN configuration (LC) command, a system console command of the
management module.
Network connection specifications (default value set during shipment)
Item Setting value
IP address switch module2: 192.168.253.37
switch module3: 192.168.253.38
switch module4: 192.168.253.39
switch module5: 192.168.253.40
Subnet mask 255.255.255.240
Connection type Dedicated to the management module

Via LAN port of the management module
When the connection setting is dedicated to the management module, you can
access the switch module via the management module. You can also access
directly to the switch module through a management module port, MGMT0 or
MGMT1. These settings can be changed using the management module system
console command or Web console.
System console terminal
LAN cable
MGMT0