Hitachi Compute Blade 2000, User Manual

Page: 883 / 1927

832
7
Co
nfig
ur
in
g t
he LAN S
wit
ch
Module
# Item Description Edit
1 Port number Displays port numbers. -
2 Note
Edit supplementary information using up to 64
alphanumeric characters.
Available
3 Shutdown status Select shutdown status: Enable or Disable Available
4 Port speed Select a port speed. Available
5 Port connected mode Select a port connected mode.
- When a parameter including “auto” or the
“
auto” itself is assigned to the port speed or
port connected mode, auto-negotiation is
performed.
- When not using auto-negotiation, set the port
speed to 10 or 100 and also the duplex to full
or half.
- When you have changed the port speed to 10
or 100 and the duplex to half for the server
connection port, the mode becomes “auto”
without applying the changed values. The
values, however, are changed on the Web
console.
- When not using auto-negotiation with the
server connection port, make sure to select
1000 for the port speed and full for the port
connection mode.
- When selecting auto 1000 for the port speed
of the server connection port, do not change
the port connection mode. The port might be
linked down and then linked up.
Available
6 Flow control reception Select a value for flow control reception.
- desired:
With the fixed mode specified, pose packets
are received. With auto-negotiation specified,
pose packet receptions are determined by
communicaiton between devices.
Available