Hitachi Compute Blade 2000, User Manual

Page: 658 / 1927

607
6
Manag
eme
nt
Modul
e S
ett
in
gs

ST Command
You can set Syslog Transfer of management modules. Type
ST
at the prompt and
press
Enter
.
Select a menu you require from the following list, and execute it.
Menu Description
E. Edit Syslog transfer setting. Changes the Syslog transfer setting...
Q. Quit Quits the ST command..
Items of Syslog transfer setting are described in the following table.
Item
Description of
item
Value
Description of value
Syslog
transfer
Syslog transfer
setting
Enable Executes Syslog transfer.
Disable Not execute Syslog transfer.
Hostname
of syslog
server
IP address/host
name for
destination
syslog server
Character string Character string from one to 255;
available characters:
alphanumerics, period “.”, and
hyphen “-“.
------ Syslog transfer is disabled.
Notification
of audit
event
Notification
setting for audit
event
Enable Executes Syslog transfer: An
Audit event occurs, and the
related log is sent by Syslog
transfer.
Disable Not execute Syslog transfer.
------ Syslog transfer is disabled.
If you enter
E
in the ST command and press Enter , you can edit the Syslog transfer
setting. Current setting values are displayed in the following order, and the prompt is
ready. Just press Enter , or type a setting value and press Enter . You will go on to the
next item.
No. Item
1 Syslog transfer
2 Host name of syslog server
3 Notification of audit event
<< ST - Syslog Transfer. >>
-- Syslog transfer setting --
Syslog transfer : Enable
Hostname of syslog server : 192.168.0.100
Notification of audit event : Enable
-- Syslog transfer menu --
E. Edit syslog transfer setting.
Q. Quit.
(E,[Q]) :