Hitachi Compute Blade 2000, User Manual

Page: 1841 / 1927

1790
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
SMASH for server blades
This section describes SMASH (Systems Management Architecture for Server Hardware)
supported by X57A2, X55R3, and X55S3 server blades.

SMASH functions are supported with the following BMC firmware version.
BMC: 05-50 or later, or 07-01 or later with a standard server blade, X55R3 or
X55S3, or X55R4 model
BMC: 06-01 or later with a high-performance server blade, X57A2 model
SMASH overview
Systems Management Architecture for Server Hardware (SMASH) is a standard
management tool for server hardware provided by Distributed Management Task
Force (DMTF). You can use SMASH to perform operations including powering on or
off a server blade and refer to FRU information. X57A2, X55R3, X55S3, and X55R4
server blade models can use SMASH with SMASH- CLP (Command Line Protocol)
and WS-MAN (Web Services Management). See the DMTF Web site shown below
for details about SMASH and WS-MAN.
http://dmtf.org/
SMASH features
The following items are available for SMASH with Compute Blade 2000.
SMASH Operations
# Operation
1 Shows server blade status.
2 Powers on the server blade.
3 Powers off the server blade.
4 Performs server blade hardware reset.
5 Shows processor status.
6 Shows memory status.
7 Shows power supply module status.
8 Shows fan module status.
9 Shows sensor information.
10 Shows FRU information.
11 Switches boot devices.
12 Shows account information.
13 Restarts BMC.