Hitachi Compute Blade 2000, User Manual

Page: 510 / 1927

459
6
Manag
eme
nt
Modul
e S
ett
in
gs

SCO command
You can show and set the inactivity timer and serial connection. Enter
SCO
to the
prompt, and press
Enter
.
Select a menu you require from the following list, and execute it.
Menu Description
I. Set in activity timer Sets the inactivity timeout period.
B. Set baud rate. Sets the baud rate of a serial port.
P. Set serial port connection. Sets the destination for a serial port.
Q. Quit Quits the SCO command.
The current setting, the session information that you currently log in, is shown in the
following list.
Item Description of item Value Description of value
Inactivity
timer
Monitoring timer for
inactivity
0 to 1440
Integers from 0 to 1440 can be
specified. Unit: minute
Setting “
0” cancels the timer, and
timeout for inactivity is not executed.
The serial console setting, the console information on serial connection, is shown in
the following list.
Item Description of item Value Description of value
Baud rate
The baud rate of the
serial console for the
management module
9600
Can Select a baud rate among the
three: 9600 bps, 38400 bps, and
115200 bps.
38400
115200
Serial
console
The destination for a
serial port
Management
module
Can switch destinations to connect
the serial port to: the management
5713RF0 NNNNN(0)SVP> SCO ( Enter )
<<SCO –Setting console.>>
-- Current session setting --
Inactivity timer (min): 10
-- Serial console setting --
Baud rate (bps)
: 9600
Serial console : Management module
-- Console setting menu --
I. Set inactivity timer.
B. Set baud rate.
P. Set serial port connection.
Q. Quit.
(I, B, P, [Q]):