Hitachi Compute Blade 2000, User Manual

Page: 1234 / 1927

1183
12
Log
ical
par
titio
ni
ng man
age
r
High-performance server blade
LPAR manager firmware
Reduction in
physical
processors
Description
Version currently used (1) Added or
reduced
Since the setting is taken over as it is,
the incorrect setting information
remains set.
On the Logical Partition Configuration
screen, reset the number of LPAR
logical processors using the function.
Then if the physical processor number
needs to be set to the logical processor,
reset it on the Logical Processor
Configuration screen and save the
LPAR manager configuration. Without
resetting, an error occurs when you
create LPAR configuration or update it
from SC/BSM.
78-12 to 78-22
78-40 or later Added or
reduced
The setting is initialized.
If the physical processor number needs
to be set to the logical processor, reset it
on the Logical Processor Configuration
screen and save the LPAR manager
configuration. Without resetting, LPAR
manager will automatically assign a
physical processor.
Update to a specific version (2) Not added/
reduced
The setting is initialized, but the
information remains internally.
On the Logical Partition Configuration
screen, reset the number of LPAR
logical processors using the function.
Then if the physical processor number
needs to set to the logical processor,
reset it on the Logical Processor
Configuration screen and save the
LPAR manager configuration. Without
resetting, an error occurs when you
create LPAR configuration or update it
from SC/BSM.
Before update After update
78-12 to 78-22 78-40 to
78-7X