Hitachi Compute Blade 2000, User Manual

Page: 997 / 1927

946
11
I/O S
lot
Expan
sion
Un
it
-- SNMP agent setting --
Agent : Enable
Contact name : user01
Location : A3F
Port number : 161
Trap level : All
SNMP version : v1/v2c/v3
Engine ID string : xxxxxxxxxxxxxx
Engine ID : yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key.
(Enter)
The screen for engine ID strings is displayed only when version v1/v2/v3 is selected.
Be sure to configure a string for engine ID. If no string is configured for engine ID,
“
([Unchange]) is not displayed.
If you type
M
in the SNM command menu and press the [Enter] key, you can set the
SNMP manager connection. You are asked to select a SNMP manager. When you
type a SNMP manager number, the current setting is displayed in the following
numerical order. To proceed to the next setting, press Enter , or enter a setting value
and press Enter .
With SNMP version v1/v2c:
Menu Description
1 Address for SNMP manager
2 Port number for SNMP manager
3 Community Name for SNMP manager
When you type a community manager of the SNMP manager, the changed setting
value is displayed. A confirmation message appears. Type
Y
and press Enter , and the
SNMP manager connection setting is applied. To cancel the setting, type
N
and press
Enter
, or just press
Enter
.
(A,M,DA,DM,T,C,[Q]) : M (Enter)
Select manager (0-3,[Q=Quit]) : 0 (Enter)
SNMP version : v1/v2c
(0=v1/v2c,1=v3,[Unchange]) :
0 (Enter)
Hostname : 0.0.0.0
([Unchange]) :
192.168.100.200 (Enter)
Port number : 162
(1-65535,[Unchange]) :
(Enter)
Community name : Community
([Unchange]) :
com01 (Enter)
-- SNMP manager setting --
<Manager0>
SNMP version : v1/v2c
Hostname : 192.168.100.200
Port number : 162
Community name : com01