Hitachi Compute Blade 2000, User Manual

Page: 1703 / 1927

1652
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
(a) moduleStatusBlade group (19/34)
No
Object
identifier
OID Syntax Access Description
138 bladeTemper
atureEntry .1.3.6.1.4.1.11
6.5.39.3.2.3.1 Not-
Accessible NA Shows the table entry
describing the information on
the server blade temperature
sensor.
139 bladeTempIn
dex .1.3.6.1.4.1.11
6.5.39.3.2.3.1.
1 Integer32 RO Shows the index value ranging
from 1 to chassisCapacityBlade
to identify the table entry.
140 bladeTempS
ensor1Name .1.3.6.1.4.1.11
6.5.39.3.2.3.1.
2 Display
String RO Shows the temperature sensor
name for the server blade in
the slot shown in #5. (*4)
141 bladeTempS
ensor1Value .1.3.6.1.4.1.11
6.5.39.3.2.3.1.
3 Integer32 RO Shows the temperature value
of the server blade in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1°C.
The actual value is one-tenth of
the response value.
142 bladeTempS
ensor1Valid .1.3.6.1.4.1.11
6.5.39.3.2.3.1.
4 INTEGER RO Shows the temperature value
validity of the server blade in
the slot shown in #5. One of the
following values is shown. (*6)
1: invalid
2: valid
3: unknown
143 bladeTempS
ensor2Name .1.3.6.1.4.1.11
6.5.39.3.2.3.1.
5 Display
String RO Shows the temperature sensor
name for the server blade in
the slot shown in #5. (*4)
144 bladeTempS
ensor2Value .1.3.6.1.4.1.11
6.5.39.3.2.3.1.
6 Integer32 RO Shows the temperature value
of the server blade in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1°C.
The actual value is one-tenth of
the response value.
145 bladeTempS
ensor2Valid .1.3.6.1.4.1.11
6.5.39.3.2.3.1.
7 INTEGER RO Shows the temperature value
validity of the server blade in
the slot shown in #5. One of the
following values is shown. (*6)
1: invalid
2: valid
3: unknown
(*1) The reply is “unknown”, if no server blade is installed or the status cannot be obtained.
(*2) A value that the server blade obtains from a voltage and temperature sensor is shown.
“0” is shown if no server blade or no sensor is installed.
(*3) The reply is “normal” if no server blade is installed or the server blade power is off.
(*4) “Not install” is shown if no server blade is installed; “Not support” is shown if a server
blade is installed without any sensor; “Cannot get data” is shown if the data cannot be
obtained.
(*5) The response is “0” if no server blade or no sensor is installed. Obtain the MIB object of
the next OID, and determine whether or not the replied value is valid.
(*6) “invalid” is shown if no server blade or no sensor is installed; “unknown” is shown if no
information can be obtained”.