Hitachi Compute Blade 2000, User Manual

Page: 1645 / 1927

1594
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
(a) moduleConfigBlade group (3/25)
No.
Object
identifier
OID Syntax Access Description
23 bladeInfoMa
xCurrency .1.3.6.1.4.1
.116.5.39.2
.2.1.1.20 Integer32 RO Shows the max current value of
the server blade installed in the
slot shown in #5. This value is
shown using the unit of 0.1A.
(*4)(*8)
24 bladeInfoMa
xPower .1.3.6.1.4.1
.116.5.39.2
.2.1.1.21 Integer32 RO Shows the rated power value of
the server blade installed in the
slot shown in #5. This value is
shown using the unit of 1W.
(*4)(*8)
25 bladeInfoAm
bientTempHi
gher .1.3.6.1.4.1
.116.5.39.2
.2.1.1.22 Integer32 RO Shows the upper temperature
threshold value of inlet air for
warning to the server blade
installed in the slot shown in #5.
This value is shown as 1 for
0.1°C. (*4)
26 bladeInfoAm
bientTempLo
wer .1.3.6.1.4.1
.116.5.39.2
.2.1.1.23 Integer32 RO Shows the lower temperature
threshold value of inlet air for
warning to the server blade
installed in the slot shown in #5.
This value is always shown as 0.
27 bladeInfoCP
U0TempHigh
er .1.3.6.1.4.1
.116.5.39.2
.2.1.1.24 Integer32 RO Shows the upper temperature
threshold value of CPU for
warning in the server blade
installed in the slot shown in #5.
This value is shown as 1 for
0.1°C. (*4)
28 bladeInfoCP
U0TempLow
er .1.3.6.1.4.1
.116.5.39.2
.2.1.1.25 Integer32 RO Shows the lower temperature
threshold value of CPU for
warning in the server blade
installed in the slot shown in #5.
This value is always shown as 0.
29 bladeInfoCP
U1TempHigh
er .1.3.6.1.4.1
.116.5.39.2
.2.1.1.26 Integer32 RO Shows the upper temperature
threshold value of CPU for
warning in the server blade
installed in the slot shown in #5.
This value is shown as 1 for
0.1°C. (*4)
30 bladeInfoCP
U1TempLow
er .1.3.6.1.4.1
.116.5.39.2
.2.1.1.27 Integer32 RO Shows the lower temperature
threshold value of CPU for
warning in the server blade
installed in the slot shown in #5.
This value is always shown as 0.
(*1) “Not install” is shown if no server blade is installed; “Cannot get data” is shown if the
data cannot be obtained.
(*2) “Not install” is shown if no server blade is installed; “Cannot get data” is shown if the
server blade data cannot be obtained. “Not support” is shown as the response in this
equipment.
(*3) The response is “-1” if no server blade is installed, or if no partition exists.
(*4) The response is “0” if no server blade or no processor is installed.
(*8) With SMP configuration, when the primary blade location is specified in a partition, the
values of the entire partition are displayed; when a blade location other than the primary
one is specified, “0” is displayed.