Hitachi Compute Blade 2000, User Manual

Page: 958 / 1927

907
11
I/O S
lot
Expan
sion
Un
it
Item
Description of
item
Value
Description of value
# I/O module slot
number
0 or 1 -
Behavior
I/O module
performance
------- No I/O module is installed.
“
Active” undecided
Boot is disabled.
Active Unit management master
Standby Not unit management master
Power Power supply
status
------- No I/O module is installed.
On The I/O module is powered on.
Off The I/O module is powered off.
Condition Status:
Whether or not
available for the
user operation;
FAIL status
------- No I/O module is installed.
Normal -
Booting Booting now
Shutting down Shutting down now
Boot disable Boot is disabled.
FAIL The module fails.
LID Lamp
Status of the
identification LED
-------
No I/O module installed; Boot is
disabled; Boot of the other module is
disabled; In failure; the other module
in failure.
On LED lights solid.
Off LED is off.
Type
P
in the IOC command menu and press Enter. The Power control menu is
displayed.
(P,L,[Q]) : P (Enter)
-- I/O module status --
# Behavior Power Condition LID lamp
- -------- ----- ------------- --------
0 ------ --- ----------- ------
1 Active On Normal Off
-- Power control menu --
S. Shutdown.
R. Restart.
SW. Switch active/standby.
Q. Quit.
(S,R,SW,[Q]) :
Select a menu item from the following list to execute it.
Menu Description
S. Shutdown Shuts down the I/O module.
R. Restart Restarts the I/O module.
SW. Switch active/standby Switches the unit management masters of the I/O module.
Q. Quit Returns to the previous menu.