1175
12
Log
ical
par
titio
ni
ng man
age
r
Open the
Logical Partition Configuration
screen. Move the cursor over the
PC
column of the LPAR whose Processor Capping you want to enable, and press
Enter
. This will open a subscreen. Use the arrow keys ([↑] or [↓]) to select
Yes
, and
press
Enter
.
(21) How to enable the virtual COM console function
Display the
Logical Partition Configuration
screen.
Place the cursor on the
VC
column of the LPAR line whose virtual COM console
function you want to enable, and then press
Enter
to display the subscreen. Select
Yes
by moving the cursor with the [
] [
] keys, and then press
Enter
. As a result,
you can connect the LPAR guest screen via telnet. The TCP port to be used at the
connection via telnet can be found in the comment that appears when pointing to
the VC column of LPAR line or in the subscreen that appears when pointing to the
VC column of LPAR line and pressing
Enter
.
When the virtual COM console function is enabled and connected to the LPAR
guest console via telnet, LPAR guest screen connection by using the
F8
key in the
LPAR manager screen is still available. In this case, the LPAR guest screen
displayed on the LPAR manager screen is preceded.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Configuration ------------------------------------+|
|| # Name Sta Pro Shr Ded Srv Mem VN ID AA AC PC VC PB ||
|| 1 LPAR1 Act 2 0 2 100 2048 0 Y 1 N * N BIOS ||
|| 2 LPAR2 Dea 1 0 1 100 1024 0 Y 2 N * N BIOS ||
|| 3 LPAR3 Dea 1 0 1 100 1024 0 Y * N * N BIOS ||
|| 4 LPAR4 Dea 1 0 1 100 1024 0 Y * N * N BIOS ||
|| 5 ||
|| 6 +-------------------------+ ||
|| 7 | LPAR1 Virtual Console | ||
|| 8 | (TCP Port=20801) | ||
|| 9 | | ||
|| 10 | Yes | ||
|| | No |p / [PageDown]:Page Down ||
|+------------------------+-------------------------+-------------------------+|
|+- Logical Information --| Virtual Console Disable |hysical Information -----+|
|| Pro Shr+-------------------------+er Memory : 4608 MB ||
|| Assign Total 5 0 5 5120 0 || Processors : 8(8) ||
|| Act Total 2 0 2 2048 0 || Shared : 0 ||
|| Remain 2560 || Dedicate : 2 ||
|+----------------------------------------------++----------------------------+|
| Virtual Console(TCP Port=20801) |
+------------------------------------------------------------------------------+
| F2:Mem Alloc Dsp F3:Act F4:Deact F5:React F6:Add F7:Remove Esc:Menu |
+------------------------------------------------------------------------------+
Summary of Contents for Compute Blade 2000
