Hitachi Compute Blade 2000, User Manual

Page: 1403 / 1927

1352
12
Log
ical
par
titio
ni
ng man
age
r

Using the HvmGetPerf command
The HvmGetPerf command obtains an overview of system operation from the specified
LPAR manager and outputs the results to the specified destination. It can also output
information for a specific LPAR only.
If it cannot connect to the specified LPAR manager, it terminates by time-out.
Execute the HvmGetPerf command as follows: (
∆ indicates a space.)
HvmGetPerf ∆ -host= Ip-address [ ∆ –type= item-to-be-obtained ]
[ ∆ –lpar=
LPAR-number
] [ ∆ –filename=
output-destination-file-name
]
[ ∆ -timeout= timeout-time ] [ ∆ -srcip= IP address ]:
The following table describes options for the HvmGetPerf command.
Option Description
-host=IP-address Specify the IP address of the LPAR manager to obtain an overview of
operation. Specify an address in dot-delimited decimal format (“.”). This
parameter is required.
Example: 192.168.0.20
-type=item-to-be-obtained Specify the item to obtain an overview of operation. The following
values can be specified.
all
Obtains all operation overview items.
host Obtains an operation overview for the LPAR manager
system.
pcpu
Obtains an operation overview for the physical CPU.
lpar Obtains an operation overview for the LPAR.
If this option is omitted, the command obtains all operation overview
items.
-lpar=LPAR-number Specify the LPAR to obtain an overview of operation using an integer
value. If this option is omitted, the command outputs information for all
LPARs.
-filename=output-destinati
on-file-name
The command outputs an overview of operation in text format to the
specified file. If the specified file exists, the contents of the file are
erased and overwritten with the operation outline information.
If a minus sign (-) is specified as the destination, the command outputs
an overview of operation to the standard output.
If the -filename parameter is omitted, the command outputs operation
overview information in summary format to the standard output.
-timeout=timeou-ttime Specify the time the command times out if it cannot connect to the
LPAR manager, in the range from 1 to 3600 seconds. If this option is
omitted, the command will time out in three seconds.
If 0 is specified, the HvmGetPerf command never times out and
infinitely waits for a response from the LPAR manager.
-srcip=IP address Specify the IP address on the management server, a source address,
which is used for communication with LPAR manager. This setting is
required for fixing an IP address for HvmGetPerf command when the
management server uses the IP address in the network configuration,
where the server is connected to multiple segments.
HvmGetPerf: 1.5 or later versions