14
Appendi
x
Switch module specifications
Specifications of the built-in LAN switch module
Item
Specification
1-Gbps
LAN switch module
1/10-Gbps
LAN switch module
Capacity Switch capacity (half duplex)
48 Gps
Packet processing
35.7 Mpps
LAN port External port
10/100/1000BASE-T x 4 ports
-
10GBASE-R x 2 ports
Internal port
1000BASE-Serdes x 10 ports (Server blade I/F)
Connector 10/100/1000BASE-T x 4
RJ-45
10G
XFP
Console port (Management port)
10/100 Ethernet (RJ-45)
Serial port (RS-232C)
* In-band via the management module
Layer-2
function
VLAN
Port VLAN, Tag-VLAN (IEEE802.1Q),
Protocol VLAN, MAC-VLAN, Tag conversion
Spanning tree protocol
STP (IEEE802.1D), RST P(IEEE802.1w), PVST+,
MSTP(IEEE802.1s)
Other functions
IGMP, snooping, MLD snooping, Link aggregation, jumbo
frame, IEEE802.3ah/UDLD, Ring protocol
Layer-3
function
IPv4 routing
Uni-cast
Static, RIP, RIP2, OSPF, BGP4
Multi-cast
IGMPv2/v3, PIM-SM, PIM-SSM
Ipv6 routing
Uni-cast
Static, RIPing, OSPFv3, BGP4+
Multi-cast
MLDv1/v2, PIM-SM, PIM-SSM
Network
function
Security function
Filter (L2/IPv4/IPv6/L4), and port to port relay interruption,
IEEE802.1X authentication
Quality of Service (QoS)
Flow detection (L2/IPv4/IPv6/L4), band monitoring (rate
control), marking (DSCP/User Priority), Priority control (Flow
base, User priority mapping), disposal control (taildrop),
shaper (eight classes, port band control), scheduling (PQ,
WRR, PQ+DRR, WFQ)), Diff-serv, IEEE802.1p
High reliability; Advanced
operation
Load balance (IPv4/IPV6), VRRP (IPv4/IPv6),
Static polling, VRRP polling,
Link aggregation (IEEE802.3ad), GSRP,
Graceful Restart (Helper), Storm control
L2-VPN
VLAN tunneling
Operation management function
SNMPv1/v2/v3, MIB II, IPv6MIB, RMON, syslog, ping,
traceroute, SSH, telnet, ftp, tftp, NTP, IPv4DHCP
server/relay, PrefixDelegation, LLDP, OADP, port mirroring,
RADIUS, , Uplink failover, (Dynamic) Flow
statistics/information (sFlow)
Power supply
12 V
Outside dimensions (W x D x H: mm)
161 x 243 x 32.3 (except Backplane connector)
Mass
1.16 kg
1.40 kg
Summary of Contents for Compute Blade 2000
