Hitachi Compute Blade 2000, User Manual

Page: 1411 / 1927

1360
12
Log
ical
par
titio
ni
ng man
age
r
In the network where the management server is connected to multiple segments, give
priority to the NIC port on the management server that is used for the HvmSh command,
and register the route on the routing table. Then, the registered route is used for all
communication from the management server to LPAR manager.
To execute HvmSh command on PFM with the HvmSh command, copy the HvmSh
command stored in the HVM Navigator CD into the specified PFM folder. GUI operation
from PFM can display statistics information in a graph or table in the Web browser.
See the PFM manual for further details.
The following versions are required for executing HvmSh command on PFM.
PFM HvmSh command LPAR manager
09-10 or later versions 4.0 or later versions 57-30 or later versions

With LPAR manager not supporting LP CLI IP Address,
set the IP address of the management server to BSM IP
Address.

With LPAR manager supporting LP CLI IP Address, set
the IP address of the management server to LP CLI IP
Address. Setting the management server IP address to
BSM IP Address.
Routing table:
[Example 1]
route -p add 172.16.0.2 mask 255.255.255.254 192.168.0.254
[Example 2]
route -p add 172.16.0.2 mask 255.255.255.255 192.168.0.254
route -p add 172.16.0.3 mask 255.255.255.255 192.168.0.254
Segment B
Segmen t A Segment B
Segment B
Management server
PFM Agent HvmSh command Other applications
NIC#0 NIC#1
Router
(172.16.0.2)
LPAR manager
BSM IP address 1 (192.168.0.1)
BSM IP address 2
BSM IP address 3
BSM IP address 4
NIC
Segment B
(172.16.0.3)
LPAR manager
NIC
BSM IP address 1(192.168.0.1)
BSM IP address 2
BSM IP address 3
BSM IP address 4
IP address
(192.168. 0 .1)
IP address
( 172 .16. 0 .1)
IP address
(192.168.0.254
)
Routing table
Prioritized