Hitachi Compute Blade 2000, User Manual

Page: 1726 / 1927

1675
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
(b) moduleStatusMm group (6/7)
No
Object
identifier
OID Syntax Access Description
37 mmVoltSensor8
Valid .1.3.6.1.4.1
.116.5.39.3
.3.2.1.25 INTEGER RO
Shows the voltage value
validity of the management
module in the slot shown in
#5. One of the following
values is shown. (*6)
1: invalid
2: valid
3: unknown
38 mmVoltSensor9
Name .1.3.6.1.4.1
.116.5.39.3
.3.2.1.26 Display
String RO Shows the voltage sensor
name for the management
module in the slot shown in #5.
(*4)
39 mmVoltSensor9
Value .1.3.6.1.4.1
.116.5.39.3
.3.2.1.27 Integer32 RO
Shows the voltage value of
the management module in
the slot shown in #5. (*5)
The value is shown using the
unit of 0.1V. The actual value
is one-tenth of the response
value.
40 mmVoltSensor9
Valid .1.3.6.1.4.1
.116.5.39.3
.3.2.1.28 INTEGER RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
41 mmTemperatur
eTable .1.3.6.1.4.1
.116.5.39.3
.3.3 Not-
Accessible NA Shows the table of information
on the management module
temperature sensor.
42 mmTemperatur
eEntry .1.3.6.1.4.1
.116.5.39.3
.3.3.1 Not-
Accessible NA Shows the table entry
describing the information on
the management module
temperature sensor.
43 mmTempIndex .1.3.6.1.4.1
.116.5.39.3
.3.3.1.1 Integer32 RO Shows the index value ranging
from 1 to chassisCapacityMm
to identify the table entry.
44 mmTempSenso
r1Name .1.3.6.1.4.1
.116.5.39.3
.3.3.1.2 Display
String RO Shows the temperature sensor
name for the management
module in the slot shown in #5.
(*4)
(*1) “unknown” is shown in the process of setting redundancy, or when no management
module is installed or the status cannot be obtained.
(*2) “unknown” is shown when no management module is installed or the status cannot be
obtained. ”power-off” is shown after executing SDN in the process of setting
redundancy.
(*3) “0” is shown as the number of sensor when no management module is installed.
(*4) “Not install” is shown if no management module is installed or redundancy setting is on
the process; “Cannot get data” is shown if the data cannot be obtained.
(*5) “0” is shown if no management module is installed or redundancy setting is on the
process, if the data cannot be obtained, or if no sensor exists.
(*6) “invalid” is shown if no management module is installed or redundancy setting is on the
process; “unknown” is shown if no data is obtained”.