Hitachi Compute Blade 2000, User Manual

Page: 1746 / 1927

1695
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
Acquire MIB files
for SNMP Function.
Set environment
for SNMP Function
on the manager side
Set environment for
SNMP Function
device.
How to use the SNMP function
for I/O slot expansion unit
(1) Procedure for SNMP
(2) Acquiring MIB files for SNMP
Acquire MIB files from the SNMP agent by copying MIB files to the user directory
with “SNM command” on the console of the I/O slot expansion unit.
No. Description
[1] Acquire a MIB file that is required to
perform the SNMP function.
[2] Register the information in the MIB
file acquired in step [1] into the
SNMP manager.
[3] Set the environment that allows
SNMP trap function to perform.
[4] Using the console, set the
information required for SNMP
functions, including the IP address of
the destination SNMP manager and
the name of a community for
SNMPv1/v2c; the IP address of the
destination SNMP manager, engine
ID, access type, user name, and
password for SNMPv3..
[5] Using the test notification function,
perform a test trap notification. If the
SNMP manager fails to receive any
test trap notification or receives
notification of authentication error in
SNMPv3Trap, review steps [2], [3],
and [4] for correction.
[6] The state is in normal operation.
Set environment for
SNMP Function.
on the agent side
Execute the SNMP
notification receive
test (SNM).
Is the SNMP
properly?
manager notified
Start using SNMP
functions.
Yes.
No.
Modify the
environment
and settings.
[1]
[2]
[3]
[4]
[5]
[6]