1/2
© 2018 ROHM Co., Ltd.
No. 60UG063E Rev.001
Apr.2018
User’s Guide
Accelerometer
KX224-I2C-EVK-001 Manual
KX224-I2C-EVK-001 is an evaluation board for KX224-1053, which is a ROHM Accelerometer. This User’s Guide is about how to use KX224-I2C
-EVK-001 together with SensorShield*
1
. *1 SensorShield is sold as Shield-EVK-001.
Preparation
Arduino Uno
1pc
Personal Computer installed Arduino IDE
1pc
Requirement : Arduino 1.6.7 or higher
Please use Arduino IDE which can be
downloaded from the link below:
USB cable for connecting Arduino and PC 1pc
SensorShield
1pc
KX224-I2C-EVK-001
1pc
Setting
1.
Connect the Arduino and the SensorShield (Figure 1)
Figure 1. Connection between the Arduino and the
SensorShield
2.
Connect KX224-I2C-EVK-001 to the socket of I2C area
on the SensorShield (Figure 2)
3.
Set Voltage of the SensorShield to 1.8V or 3.0V (Figure 2)
Figure 2. Connection between KX224-I2C-EVK-001 and
the SensorShield
4.
Connect the Arduino to the PC using a USB cable
5.
Download KX224-I2C.zip from the link below:
http://www.rohm.com/web/global/sensor-shield-support
6.
Launch Arduino IDE
7.
Select [Sketch]->[Include Library]->[Add.ZIP library...],
install KX224-I2C.zip
8.
Select [File]->[Examples]->[KX224-I2C]->[example]->
[KX224-I2C]
USB connecter
SensorShield