Freescale Semiconductor PowerPC e500 Core, Reference Manual

Page: 168 / 548

PowerPC e500 Core Family Reference Manual, Rev. 1
3-38 Freescale Semiconductor
Instruction Model
Table 3-26. User-Level Cache Instructions
Name Mnemonic Syntax Implementation Notes
Data Cache
Block
Allocate dcba r A ,r B The EA is computed, translated, and checked for protection violations. For cache hits, 32
bytes of zeros are written to the cache block and the tag is marked modified. For cache
misses with the replacement block marked non-dirty, a zero reload is performed and the
block is marked modified. However, if the replacement block is marked modified, the
contents are written back to memory first. If WIMG = xx1x (coherency enforced), the
address is broadcast to the bus before the zero reload fill.
A no-op occurs if the cache is disabled or locked, if the page is marked write-through or
cache-inhibited, or if a TLB protection violation occurs.
Data Cache
Block Flush
1
dcbf r A ,r B The EA is computed, translated, and checked for protection violations:
• For cache hits with the tag marked modified, the cache block is written back to memory
and the cache entry is invalidated.
• For cache hits with the tag marked not modified, the entry is invalidated.
• For cache misses, no further action is taken.
A
dcbf is broadcast if WIMG = xx1x (coherency enforced). dcbf acts like a load with
respect to address translation and memory protection. It executes in the LSU regardless
of whether the cache is disabled or locked.
Data Cache
Block Set to
Zero
1
dcbz r A ,r B The EA is computed, translated, and checked for protection violations. For cache hits, 32
bytes of zeros are written to the cache block and the tag is marked modified. For cache
misses with the replacement block marked not modified, the zero reload is performed and
the cache block is marked modified. However, if the replacement block is marked modified,
the contents are written back to memory first.
dcbz takes an alignment interrupt if the
cache is locked or disabled or if the cache is marked WT or CI. If WIMG = xx1x (coherency
enforced), the address is broadcast to the bus before the zero reload fill.
The interrupt priorities (from highest to lowest) are as follows:
1 Cache Is locked—alignment interrupt
2 Page marked write-through or cache-inhibited—alignment interrupt
3 TLB protection violation—data storage interrupt
dcbz is broadcast if WIMG = xx1x (coherency enforced).
Data Cache
Block Store
1
dcbst r A ,r B The EA is computed, translated, and checked for protection violations.
• For cache hits with the tag marked not modified, no further action is taken.
• For cache hits with the tag marked modified, the cache block is written back to memory
and marked exclusive.
If WIMG = xx1x (coherency enforced) dcbst is broadcast. dcbst acts like a load with
respect to address translation and memory protection. It executes regardless of whether
the cache is disabled or locked.
Data Cache
Block Touch
2
dcbt CT ,r A ,r B dcbt allows potential performance enhancements through software-initiated prefetch
hints. Implementations are not required to take action based on execution of dcbt but can
prefetch the cache block corresponding to the EA into their cache. When dcbt executes,
the e500 checks for protection violations (as for a load instruction). dcbt is treated as a
no-op in the following cases:
• The access causes a protection violation.The page is mapped cache-inhibited.
• All lines that this entry maps to are locked or the cache is disabled.
• HID0[NOPTI] = 1
Otherwise, if no data is in the cache location, the e500 requests a cache line fill. Data
brought into the cache is validated as if it were a load instruction. The memory reference
of a
dcbt sets the reference bit.