Description
Error/Warning Message
Error/Warning
ID
Repair the circuits that originate from
or drop at the specified node, with the
new MAC address.
The MAC address of the node {0} has been changed.
All circuits originating from or dropping at this node
will need to be repaired.
WID-2165
Initialize the node and proceed.
The node cannot be inserted into the domain because
it is not initialized.
WID-2166
You do not have the privilege to
perform this action.
You have insufficient security privileges to perform
this action.
WID-2167
CTC encountered warnings while
loading the alarm profile import file.
The following warnings surfaced while loading {0}.
{1}
WID-2168
The profile selected does not exist on
the node. Select another profile.
One or more of the profiles selected do not exist on one
or more of the nodes selected.
WID-2169
The number of profile that can exist
on a node has reached the limit. To
add a profile, delete any of the existing
profiles.
The profile list on node {0} is full. Please delete one
or more profiles if you wish to add the profile. {1}
WID-2170
Refer to the warning message text.
You have been logged out. Click OK to exit CTC.
WID-2171
The Internet Inter-ORB Protocol
(IIOP) listener port setting for the CTC
Common Object Request Broker
Architecture (CORBA) will be applied
on the next CTC restart.
The CTC CORBA (IIOP) listener port setting of {0}
will be applied on the next CTC restart.
WID-2172
Select an alternate port, as the current
port is either in use or you do not have
enough permission on it.
The port is unavailable. The desired CTC CORBA ({0})
listener port, {1}, is already in use or you do not have
permission to listen on it. Please select an alternate port.
EID-2173
You entered an invalid firewall port
number. Try again.
An invalid number was entered. Please check it and try
again.
EID-2174
There is a mismatch with the extension
byte.
An extension byte mismatch occurred. {0}
WID-2175
Refer to the warning message text.
Not all spans have the same OSPF area ID. This will
cause problems with protection switching. To determine
the OSPF area for a given span, click on the span and
the OSPF area will be displayed in the pane to the left
of the network map.
WID-2176
Refer to the warning message text.
Only one edit pane can be opened at a time. The
existing pane will be displayed.
WID-2178
Refer to the warning message text.
No update is available because the circuit has been
deleted.
WID-2179
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
492
Error Messages
Error Messages Reference
