Description
Error/Warning Message
Error/Warning
ID
An error occurred when CTC tried to
open the circuit for editing.
An error occurred while editing the circuit(s). {0} {1}.
EID-2006
CTC cannot save the preferences.
The preferences could not be saved.
EID-2007
CTC cannot find the file needed to
save the circuit preferences.
The circuit preferences could not be saved: {0}
EID-2008
Refer to the error message text.
CTC was unable to download the package: {0}
EID-2009
CTC could not delete the destination.
An error occurred while deleting the destination.
EID-2010
CTC could not destroy the circuit.
The circuit could not be destroyed.
EID-2011
CTC could not reverse the circuit
destroy.
The reverse circuit could not be destroyed.
EID-2012
Refer to the error message text.
The circuit creation failed. The circuit creation cannot
proceed due to changes in the network which affected
the circuit(s) being created. The dialog box will close.
Please try again.
EID-2013
You must select a circuit to complete
this function.
No circuit(s) were selected. {0}
EID-2014
You must delete the rolls in the circuit
before deleting the circuit itself.
The circuit {0} cannot be deleted because it has one or
more rolls.
EID-2015
CTC could not delete the tunnel as
there are circuits that use the tunnel.
The circuit deletion failed.
EID-2016
There was an error mapping the
circuit.
An error occurred while mapping the circuit. {0}
EID-2017
There was a failure in circuit roll.
Change the circuit state to
DISCOVERED and proceed.
The circuit roll failed. The circuit must be in the
DISCOVERED state in order to perform a roll.
EID-2018
Refer to the error message text.
The circuit roll failed. Bridge and roll is not supported
on DWDM circuits.
EID-2019
Refer to the error message text.
The circuit roll failed. The two circuits must have the
same direction.
EID-2020
Refer to the error message text.
The circuit roll failed. The two circuits must have the
same size.
EID-2021
Refer to the error message text.
The circuit roll failed. A maximum of two circuits can
be selected for a bridge and roll operation.
EID-2022
Refer to the error message text.
CTC was unable to create a new user account.
EID-2023
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
483
Error Messages
Error Messages Reference
