Description
Error/Warning Message
Error/Warning
ID
Refer to the error message text.
The NTP/SNTP server could not be changed.
{1}
EID-6013
Change the Out-of-service state to
Active.
The operation failed because the reference state is OOS.
EID-6014
Refer to the error message text.
The distance extension cannot be disabled if the port
media type is FICON 1Gbps ISL or FICON 2Gbps ISL.
EID-6015
Refer to the error message text.
The card mode cannot be changed to Fibre Channel
Line Rate if the port media type is FICON 1Gbps ISL
or FICON 2Gbps ISL.
EID-6016
A node IP address cannot be the
destination for a static route.
The destination of a {0} route cannot be a node IP
address.
EID-6017
Refer to the error message text.
The destination of a {0} route cannot be the same as
the subnet used by the node.
EID-6018
The network address such as
255.255.255.255 is not valid. Enter a
valid address.
The destination of a static route cannot be
255.255.255.255
EID-6019
Refer to the error message text.
The destination of a static route cannot be the loopback
network (127.0.0.0/8).
EID-6020
Length of subnet mask must be within
the specified range.
The subnet mask length for a non default route must
be between 8 and 32.
EID-6021
Refer to the error message text.
The subnet mask length for a default route must be 0.
EID-6022
The destination of a static route must
not be an internal network.
The destination of a {0} route cannot be an internal
network{1}.
EID-6023
The destination of a static route must
not be a class D or class E address.
The destination of a {0} route cannot be a class D
(224.0.0.0/4) or class E (240.0.0.0/4) address.
EID-6024
The destination of a static route must
not be a class A broadcast address. It
should be (xxx.0.0.0).
The destination of a {0} route cannot be a class A
broadcast address (x.255.255.255/8).
EID-6025
The destination of a static route must
not be a class B broadcast address.
The destination of a {0} route cannot be a class B
broadcast address (x.x.255.255/16).
EID-6026
The destination of a static route must
not be a class C broadcast address.
The destination of a {0} route cannot be a class C
broadcast address (x.x.x.255/24).
EID-6027
The destination of a static route must
not be a subnet broadcast address of a
node IP.
The destination of a {0} route cannot be the subnet
broadcast address associated with a node IP address.
EID-6028
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
534
Error Messages
Error Messages Reference
