Description
Error/Warning Message
Error/Warning
ID
Refer to the warning message text.
If you apply routing constraints to more than {0} nodes,
performance might be affected and the operation might
require more time than expected. Select Yes if you
intend to proceed in spite of this risk, or No if you
prefer to review your selection.
WID-5065
Refer to the warning message text.
The routing constraints will be lost. Are you sure you
want to reset your changes?
WID-5066
Refer to the warning message text.
The routing constraints will be lost. Are you sure you
want to leave this panel?
WID-5067
Refer to the error message text.
The routing constraints could not be applied.
EID-5068
Select a node other than the source
node to add to the route.
A source node cannot be added to either of these lists.
EID-5069
Select a node other than the
destination node to add to the route.
A destination node cannot be added to either of these
lists.
EID-5070
The node is already selected either in
include or exclude list in the OCH
circuit.
This node already belongs to one of these lists.
EID-5071
Create an OCH-Trail circuit associated
with the link.
An OCH-Trail tunnel link was found but without any
associated circuit.
EID-5072
Refer to the error message.
You are creating an unprotected link from a protected
port. Do you want to continue?
EID-5073
Refer to the error message.
Deleting OCH DCN circuits will cause a loss of
connectivity to nodes in the circuit path that do not have
other DCN connections. Do you want to continue?
EID-5074
Enter a number between 1 and 4093.
The VLAN ID must be a number between 1 and 4093.
EID-5075
Select a VLAN ID that is not present
in the current profile.
An error occurred while provisioning the VLAN ID.
The VLAN ID is already present in the current profile
EID-5076
CTC could not save the VLAN profile
to the file name mentioned.
An error occurred while provisioning the VLAN
database profile. {0}
EID-5077
Fill in the number of records specified
and then proceed.
The VLAN merge is not complete. You forgot to fill
{0} record(s).
EID-5078
Refer to the error message text.
An error occurred while validating the provisionable
patchcord.
EID-5079
You cannot delete a roll without
selecting a roll.
No rolls are available.
EID-5080
The circuit reference is invalid.
An error occurred while tracing the RPR ring: {0}
EID-5081
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
525
Error Messages
Error Messages Reference
