Description
Error/Warning Message
Error/Warning
ID
CTC encountered an error in IP
address, net mask length, or default
router, or a restricted IIOP port was
selected.
The configuration is invalid. {0}
EID-3395
The specified file is of wrong version.
The file {0} is the wrong version.
EID-3397
Refer to the error message text.
The PPM cannot be deleted.
EID-3398
Remove the ports connected to the
Pluggable Port Module before it can
be deleted.
The PPM cannot be deleted because it has port(s) in
use.
EID-3399
Refer to the error message text.
Unable to switch. A force to the primary facility is not
allowed.
EID-3400
The relationship between parameters
{0} and {1} are such that enabling
either one, prevents the provisioning
of the other.
{0} cannot be provisioned for the port while {1} is
enabled.
EID-3401
Refer to the error message text.
The switch request could not be completed. The {0}
card is not present or is not responding. Try again after
ensuring that the {0} card is present and is not resetting.
EID-3402
Refer to the error message text.
The administrative state transition has not been
attempted on the monitored port.
EID-3403
Refer to the error message text.
The far end IP address could not be set on the {0}
termination. The IP address cannot be: loopback
(127.0.0.0/8)
class D (224.0.0.0/4)
class E (240.0.0.0/4)
broadcast (255.255.255.255/32)
internal {1}
EID-3404
Refer to the error message text.
You cannot change card parameters with port {0} in
{1} state. Click "Reset" to revert the changes.
EID-3405
You cannot change the ring name
because a switch of the same ring type
is active.
The {0} ring name cannot be changed now because a
{0} switch is active.
EID-4000
You cannot change the ring ID
because a switch of the same ring type
is active.
The {0} node ID cannot be changed now because a {0}
switch is active.
EID-4001
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
517
Error Messages
Error Messages Reference
