Cisco NCS 2000 series, Руководство по устранению неисправностей

Страница: 494 / 602

Step 5 Click Yes in the confirmation dialog box.
The lock-on or lockout is cleared.
Initiate a Lockout on a BLSR Protect Span
SUMMARY STEPS
1. From the View menu choose Go to Network View .
2.
Click the Provisioning > BLSR tabs.
3. Choose the BLSR and click
Edit
.
4. Right-click the BLSR node channel (port) and choose Set West Protection Operation (if you chose a
west channel) or Set East Protection Operation (if you chose an east channel).
5.
In the Set West Protection Operation dialog box or the Set East Protection Operation dialog box, choose
Lockout Protect Span from the drop-down list.
6. Click
OK
.
7.
Click Yes in the two Confirm BLSR Operation dialog boxes.
DETAILED STEPS
Step 1
From the View menu choose Go to Network View .
Step 2 Click the
Provisioning
>
BLSR
tabs.
Step 3 Choose the BLSR and click Edit .
Step 4
Right-click the BLSR node channel (port) and choose Set West Protection Operation (if you chose a west channel) or
Set East Protection Operation (if you chose an east channel).
Step 5 In the Set West Protection Operation dialog box or the Set East Protection Operation dialog box, choose
Lockout Protect
Span
from the drop-down list.
Step 6 Click OK .
Step 7
Click Yes in the two Confirm BLSR Operation dialog boxes.
Clear a BLSR External Switching Command
SUMMARY STEPS
1. Log into a node on the network.
2.
From the View menu, choose Go to Network View .
3. Click the
Provisioning
>
BLSR
tabs.
4.
Click the BLSR you want to clear.
5.
Right-click the west port of the BLSR node where you invoked the switch and choose Set West Protection
Operation .
6. In the Set West Protection Operation dialog box, choose Clear from the drop-down list.
7.
Click OK .
8. Click
Yes
in the Confirm BLSR Operation dialog box.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
448
Alarm Troubleshooting
Initiate a Lockout on a BLSR Protect Span