Description
Error/Warning Message
Error/Warning
ID
Refer to the warning message text.
The path targeted for this switch request is already
active. The switch request can be applied, but traffic
will not switch at this time.
WID-5025
Refer to the error message text.
An ONS 15600 cannot serve as the primary or
secondary node in a four-fiber {0} circuit. Please
change your ring and/or node selections so that an ONS
15600 is not chosen as the primary or secondary node
in this four-fiber {1} circuit.
EID-5026
Re-open the BLSR/MS-SPRing edit
window to view the updated state of
the ring.
The {0} Edit dialog box for the ring {1} has been closed
due to significant provisioning changes. These changes
might only be transitory, so you can reopen the {0}
Edit dialog box to view the updated state.
WID-5027
Refer to the warning message text.
Warning: This operation should only be used to clean
up rolls that are stuck. It might also affect completeness
of the circuit. Is it OK to continue with the deletion?
WID-5028
Refer to the error message text.
A software downgrade cannot be performed to the
selected version while an SSXC card is inserted in this
shelf. Please follow the steps to replace the SSXC with
a CXC card before continuing the software downgrade.
EID-5029
Try the software downgrade later.
A software downgrade cannot be performed at the
present time.
EID-5030
Refer to the warning message text.
Canceling a software upgrade during a standby TSC
clock acquisition might result in a traffic outage.
WID-5031
Refer to the error message text.
An error occurred while accepting the load.
EID-5032
CTC detected an error while decoding
characters and could not load the
profile.
The profile could not be loaded. An error occurred
while decoding the characters.
EID-5033
CTC detected an error and could not
load the profile.
The profile could not be loaded.
An error occurred while trying to recognize the file
format.
EID-5034
CTC could not read the file and is
therefore unable to load the profile.
The profile could not be loaded. An error occurred
while reading the file.
EID-5035
The specified host name is invalid.
CTC could not resolve the host name
to any valid IP address
The GNE hostname {0} is invalid.
EID-5036
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
522
Error Messages
Error Messages Reference
