Description
Error/Warning Message
Error/Warning
ID
Refer to the error message text.
A valid route cannot be found for the roll creation
request.
EID-2194
Refer to the error message text.
The circuit VLAN list cannot be mapped to one
spanning tree. You can view the VLAN/Spanning Tree
table or reassign VLANs.
EID-2195
There is an error relaunching CTC.
CTC cannot be relaunched. {0}
EID-2196
There was a CORBA failure, and the
task cannot proceed. Verify the Java
version.
A CORBA failure occurred. CTC cannot proceed.
EID-2197
CTC is unable to switch to the
specified view.
CTC is unable to switch to the {0} view.
EID-2198
The login failed on the specified tasks.
Login failed on {0} {1}
EID-2199
Refer to the error message text.
CTC has detected a jar file deletion. The jar file was
used to manage one or more nodes. This CTC session
will not be able to manage those nodes and they will
appear gray on the network map. It is recommended
that you exit this CTC session and start a new one.
EID-2200
Intranode circuit must have two
sources to be a dual ring interconnect
(DRI).
An intra-node DRI circuit must have two sources.
EID-2202
You must select a member.
No member was selected.
EID-2203
The number of circuits cannot be zero
or negative.
The number of circuits must be a positive integer.
EID-2204
You must select a circuit type.
The circuit type must be selected.
EID-2205
Refer to the error message text.
The profile cannot be autoselected. Please select
profile(s) to store and try again.
EID-2206
Reduce the length of the ring name,
or remove the alphanumeric characters
from the end points.
You cannot add this span. Either the ring name is too
long (that is, ring name length is greater than {0}) or
the endpoints do not support alphanumeric IDs.
EID-2207
The version of Java Runtime
Environment (JRE) is either invalid or
unsupported.
This is an invalid or unsupported JRE.
EID-2208
The user name must be at least of the
specified character length.
The user name must be at least {0} characters long.
EID-2209
You must select a package name.
No package name was selected.
EID-2210
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
494
Error Messages
Error Messages Reference
