Description
Error/Warning Message
Error/Warning
ID
Refer to the error message text.
The node failed to restart the TELNET service on the
selected port. Try using another unreserved port that is
not being used within the following ranges: 23,
1001-9999 (with the exception of 1080, 2001-2017,
2361, 3081-3083, 4001-4017, 4022, 4081, 4083, 5000,
5001, 7200, 9100, 9300, 9401).
EID-6107
Restart a TELNET session.
That port is already in use.
EID-6108
Actions such as putting the port in an
incomplete state are not permitted
while a section trace is active.
A section trace is active on the trunk port. The action
cannot be completed.
EID-6109
You have exceeded the maximum
number of TARP requests.
The maximum number of TARP requests has been
reached.
EID-6110
Refer to the error message text.
The card in Slot {0} cannot be removed from the
protection group while its traffic is switched.
EID-6111
The shelf ID specified is invalid or
already exists, the equipment does not
support multishelf, the specified shelf
position is out of range, or the
specified shelf position is already in
use.
An error occurred while adding a shelf: {0}
EID-6112
One or more of the equipment
modules (provisioned virtual links,
provisioned server trails, provisioned
protection groups, or provisioned
DCCs) in the shelf is currently in use.
Delete cards from all the slots and try
again.
An error occurred while deleting a shelf: {0}
EID-6113
Refer to the error message text.
The maximum number of supported shelves has already
been provisioned.
EID-6114
Refer to the error message text.
There are bad or duplicate shelf positions. Valid rack
numbers are {0} to {1}. Valid rack positions are {2}
to {3}.
EID-6115
Software has prevented an attempt to
access an OCH trail.
CTC attempted to access an OCH-Trail connection that
has been destroyed.
EID-6116
The resource cannot be accessed
because it is released or fully utilized.
CTC attempted to access an OCH-Trail audit that has
been destroyed.
EID-6117
Refer to the warning message text.
The following slots are provisioned but do not have
cards installed: {0} CTC will assume they are ITU-T
interfaces.
WID-6118
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
539
Error Messages
Error Messages Reference
